| Tolerance | Blank, H6 , H7,etc. |
|---|---|
| Grade | Yg6, Yg8, Yg10, Yl10.2, Yg12,Yg15 |
| Precision | High Precision |
| Usage | End Mill , Drill Bit , Hand Tools , Etc. |
| Material | Tungsten Carbide |
| HS CODE | 8209002900 |
|---|---|
| Grade | K10/K20/K30/K40/YL10.2/YG6/YG8 |
| Port | Guangzhou, Shanghai,shenzhen Etc |
| Lead Time | 10-15 Days |
| Usage | End Mills, Drills,wood Driling ,well Drilling,cutting Hard Alloy |
| Raw Material | Tungsten Carbide |
|---|---|
| Tolerance | H6,H7,etc. |
| Surface | Unground Or Ground |
| Application | End Mill, Drill Bit, Hand Tools, Etc. |
| Grade | K10 K20 K30 Yl10.2 Yu10 |
| Tolerance | Blank, H6 , H7,etc. |
|---|---|
| Grade | Yg6, Yg8, Yg10, Yl10.2, Yg12,Yg15 |
| Precision | High Precision |
| Usage | End Mill , Drill Bit , Hand Tools , Etc. |
| Material | Tungsten Carbide |
| Tolerance | Blank, H6 , H7,etc. |
|---|---|
| Grade | Yg6, Yg8, Yg10, Yl10.2, Yg12,Yg15 |
| Precision | High Precision |
| Usage | End Mill , Drill Bit , Hand Tools , Etc. |
| Material | Tungsten Carbide |
| SIZE | 3X330mm,25X330mm, 3x10x310mm, 25x100x310mm As Drawing |
|---|---|
| SURFACE | GRIDING OR BLANK |
| MATERIAL | TUNGSTEN CARBIDE |
| GRADE | YL10.2, H10F, YG6, YG8 |
| ORIGINAL | ZHUZHOU, HUNAN |
| Type | Hand Tool Parts,blank/Grinding,cemented Tungsten Carbide Rods |
|---|---|
| Material | Tungsten Carbide WC+Co |
| Application | Cutting Tools,etc,Mining,end Mills/drills/reamers/pcb Tools |
| Grade | YL10.2,YG10X,YG6,YN8 |
| Surface | Polished Or Unground,polished Without Coolant Hole |
| Tolerance | Blank, H6 , H7,etc. |
|---|---|
| Grade | Yg6, Yg8, Yg10, Yl10.2, Yg12,Yg15 |
| Precision | High Precision |
| Usage | End Mill , Drill Bit , Hand Tools , Etc. |
| Material | Tungsten Carbide |
| Model Number | GW0120,GW0170,GW0220,GW0270,GW0320,GW0370......GW2520 |
|---|---|
| Dimensions | Diameter 1.2-25.2mm,length 330mm Or Customized |
| Density | 14.95-15.00 G.cm3 |
| Grain Size | 0.4/0.6/0.8/1.2 |
| Characteristics | High Precision, High Hardness，high Thermal Conductivity, Wear-resistance, Anti-corros Etc |
| Usage | General High Speed Cutting |
|---|---|
| Flute Diameter | 0.5mm-25mm,Customized |
| Length | 50mm-150mm,Customized |
| HRC | 45-55 55-65,etc |
| Flutes Number | 2, 3, 4, 5, 6 |
