3 Flutes Rough Tungsten Carbide End Mill Cutter For Aluminum
Introduction of carbide materials of the End mill
| AlTiN | TiAlN | TiSlN | Nano | |
| Hardness(HV) | 3200 | 2800 | 3600 | 42(GPA) |
| Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
| Oxidation Temp(°) | 900 | 800 | 1000 | 1200 |
| Friction Coefficient | 0.3 | 0.3 | 0.45 | 0.4 |
| Color | Black | Violet | Copper | Blue |
HRC choice: HRC38-45, HRC55-58
Coating choice: AITiN, AITiCrSIN
Materials to be cut: original steel, cast iron, Aluminum, copper, graphite, plastics,
Titanium , alloy, harden steel, stainless steel, HSS etc.
|
Code No.
|
Diamter d |
Cutting length l |
Total length L |
Shank D |
Flutes Z |
| 3GW5-0103050 | 1 | 3 | 50 | 4 | 3 |
| 3GW5-0205050 | 2 | 5 | 50 | 4 | 3 |
| 3GW5-0308050 | 3 | 8 | 50 | 4 | 3 |
| 3GW5-04010050 | 4 | 10 | 50 | 4 | 3 |
| 3GW5-06015050 | 6 | 15 | 50 | 6 | 3 |
| 3GW5-08020060 | 8 | 20 | 60 | 8 | 3 |
| 3GW5-01020075 | 10 | 20 | 75 | 10 | 3 |
| 3GW5-012030075 | 12 | 30 | 75 | 12 | 3 |
| 3GW5-014040100 | 14 | 40 | 100 | 14 | 3 |
| 3GW5-016040100 | 16 | 40 | 100 | 16 | 3 |
