HRC 65 2/4/6 Flute Tungsten Solid Carbide End Mills Blue NANO Coating
1. Description:
The edge is covered with ultrafine nano-coatings, which can directly process the heat-treated materials below 65 degrees with high-speed rough processing strip, reduce the number of tool changes, and improve the processing efficiency of machine tools.
The new fine tungsten steel base material has strong wear resistance and strength, and is specially used for milling cutters with high hardness.
The helix angle is 35 degrees, the front angle is large, and the edge is close to the mirror. It is more advantageous to reduce the milling resistance. The triangle design of the end face of the rear corner is adopted, and the rough processing strength is sufficient to solve the problem of tool collapse.
Super-large capacity chip removal has strong cutting, chip removal is more smooth, can achieve high efficiency processing, high precision and gloss of the workpiece.
2. Products Description:
Micro grain raw material
Grain size: 0.4-0.6μm
Co 10%, 12%
TRS >3600 N/mm2
Hardness HRA 91.8-92.5
Work piece HRC45-50 HRC55-60 HRC65 HRC68
Helix angle 30°-45 °
Diameter of cutting edge 0.2-0.9 mm; 1-20 mm
Diameter of rods 4-20 mm
Length 50-100 mm
Cutting Form Flat, Square, Ball nose, Corner Radius, Taper Flute, etc
Flutes No. 1-7
Introduction of the carbide materials of the End mill:
Carbide Grade | Technical Details of tungsten carbide rod |
10U | Co:10% WC 89% rare element: 1% HRA: 90.5°Grain Size: 0.75um |
12U | Co:12% WC 85% rare element: 3% HRA: 92.5°Grain Size: 0.4um |
K40 | Co:12% WC 84% rare element: 4% HRA: 93°Grain Size: 0.4um |
K44 | Co:12% WC 84% rare element: 4% HRA: 93.5°Grain Size: 0.4um |
The materials to be cut:
Carbide Grade | HRC of End mill | Materials to be cut |
10U | HRC45-50 | For cutting the materials under HRC35 |
12U | HRC55-58 | For cutting the materials under HRC50 |
K40 | HRC60-62 | For cutting the materials under HRC55 |
K44 | HRC65-70 | For cutting the materials under HRC63 |
Corresponding Coating:
Carbide Grade | HRC of End mill | Corresponding Coating |
10U | HRC45-50 | AlTiN |
12U | HRC55-58 | TiAlN |
K40 | HRC60-62 | TiSlN |
K44 | HRC65-70 | Nano |
Introduction of carbide materials of the End mill:
AlTiN | TiAlN | TiSlN | Nano | |
Hardness(HV) | 3200 | 2800 | 3600 | 42(GPA) |
Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
Oxidation Temp(°) | 900 | 800 | 1000 | 1200 |
Friction Coefficient | 0.3 | 0.3 | 0.45 | 0.4 |
Color | Black | Violet | Copper | Blue |
3. Application:
Used for cutting Carbon steel, Tool steel, Mould steel, Stainless steel, Titanium alloy, Copper, Cast Iron and Aluminium, etc.
Scope of application: Suitable for processing stainless steel, die steel, quenched steel and other high hardness materials.
Grinding equipment: , ANCA, ROLLOMATIC
Testing equipment: ZOLLER
4. Coating
Coating |
Color |
Coating Temperature |
Thickness (um) |
HV |
Application Temperature |
Friction coefficient |
TiAlN |
Purple-Gray | <600°C | 3-5 | 3300 | 800 °C | 0.3 |
AiTiN | Black | <600 °C | 3-5 | 3500 | 900 °C | 0.3 |
TiXco | Copper | <600 °C | 3-5 | 3500 | 1500 °C | 0.4 |
NaNo | Blue | <600 °C | 3-5 | 3800 | 1200 °C | 0.4 |
AiCrN | Silver Gray | <480 °C | 2-2.5 | 2500 | 700 °C | 0.3 |
Standard Sizes:
Order No. | Flute dia (d) | Cutting length ( l ) | Shank dia (D) | Overall length(L) |
1.0×2.5×4D×50L | 1.0 | 2.5 | 4 | 50 |
1.5×4×4D×50L | 1.5 | 4 | 4 | 50 |
2.0×5×4D×50L | 2.0 | 5 | 4 | 50 |
2.5×7×4D×50L | 2.5 | 7 | 4 | 50 |
3.0×8×4D×50L | 3.0 | 8 | 4 | 50 |
3.5×10×4D×50L | 3.5 | 10 | 4 | 50 |
4.0×10×4D×50L | 4 | 10 | 4 | 50 |
4.5×11×6D×50L | 4.5 | 11 | 6 | 50 |
5.0×13×6D×50L | 5.0 | 13 | 6 | 50 |
5.5×13×6D×50L | 5.5 | 13 | 6 | 50 |
6.0×15×6D×50L | 6.0 | 15 | 6 | 50 |
6.5×15×8D×60L | 6.5 | 15 | 8 | 60 |
7.0×17×8D×60L | 7.0 | 17 | 8 | 60 |
7.5×17×8D×60L | 7.5 | 17 | 8 | 60 |
8.0×20×8D×60L | 8.0 | 20 | 8 | 60 |
8.5×25×10D×75L | 8.5 | 25 | 10 | 75 |
9.0×25×10D×75L | 9.0 | 25 | 10 | 75 |
9.5×25×10D×75L | 9.5 | 25 | 10 | 75 |
10.0×25×12D×75L | 10.0 | 25 | 12 | 75 |
10.5×25×12D×75L | 10.5 | 25 | 12 | 75 |
11.0×28×12D×75L | 11.0 | 28 | 12 | 75 |
11.5×28×12D×75L | 11.5 | 28 | 12 | 75 |
12.0×30×12D×75L | 12.0 | 30 | 12 | 75 |
13.0×33×16D×100L | 13.0 | 33 | 16 | 100 |
14.0×40×16D×100L | 14.0 | 40 | 16 | 100 |
15.0×40×16D×100L | 15.0 | 40 | 16 | 100 |
16.0×40×16D×100L | 16.0 | 40 | 16 | 100 |
17.0×40×20D×100L | 17.0 | 40 | 20 | 100 |
18.0×40×20D×100L | 18.0 | 40 | 20 | 100 |
19.0×40×20D×100L | 19.0 | 40 | 20 | 100 |
20.0×40×20D×100L | 20.0 | 40 | 20 | 100 |
25.0×40×25D×100L | 25.0 | 40 | 25 | 100 |
Payment
T/T, Western Union, Paypal?(Choose your convenient way)
Shipment
FedEx, TNT, DHL, UPS, EMS, etc.
The port is Beijing, Shanghai, Guangzhou, Shenzhen, any port in China.(choose your convenient way)
Packing
Laser print brand name on cutter shank, 1PCS in a plastic tube, 10 PCS per group
Delivery time
Keep stock for regular types
Samples: 3- 5 days
Regular orders: 7- 10 days
Grewin carbide waiting for your kindly inquiry.