Roughing End Mills also known as ripping cutters orhoggers, are designed to remove large amounts ofmetal quickly and more efficiently than standard endmills. Coarse tooth roughing end mills remove largechips for heavy cuts, deep slotting and rapid stockremoval on low to medium carbon steel and alloy steel prior to a finishingapplication.
Used for cutting Carbon steel, Tool steel, Mould steel, Stainless steel, Titanium alloy, Copper, Cast Iron and Aluminium, etc.
Grinding equipment: , ANCA, ROLLOMATIC
Testing equipment: ZOLLER
Choose good solid carbide, good quality with cost-effective.
GOOD WEA R RESISTANCE, LONG WORKING LIFE, NANO COATING
Made with Anka machine tools and German technology, it can perform finishing and semi-finishing on heat-treated materials below 55 degrees, enhance tool life, reduce the number of roundabouts, and provide machine tool operation.
BIG DIAMETER DESIGN , SHARP CHIP REMOVAL
The unique helix angle is ground by first-class precision machine tools. The large core diameter design enhances rigidity and shock resistance .The large chip removal space is not easy to accumulate chips, and is not easy to break. It is sharp and wear-resistant, cutting smoothly, and improving milling efficiency.
Sharp Cutting Edge
Improve the effective
Hard and long working life
INSTRUCTIONS FOR USE
What buyers need to know about end mill selection and operating instructions
01.Before using the tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
02.The shorter the length of the end mill sticking out of the chuck, the better.If the end mill sticks out for a long time, it is necessary to reduce the rotational speed, feed rate or cutting amount.
03.During cutting, if abnormal vibration or sound occurs, please reduce the cutting speed and the cutting feed rate until the situation improves.
04.The steel cooling is preferably spray and air jet, which can effectively improve the use effect of the milling cutter.
|Contact Person :||Emily|